PIPING, FITTINGS & VALVES

From aquarium size tanks to industrial farming tanks and ponds, fittings and PVC piping can all be sourced through Aquafauna Bio-Marine. Contact us directly should you have any specific requirements.

 
 

PIPE / FITTINGS

PVC FITTINGS (SCHED 40/80 AND CPVC / THREADED, SOCKET & FLANGED)

  • Adaptors
  • Bulkhead fittings
  • Bushings
  • Couplers
  • Crosses
  • Elbows (90/45/30 deg)
  • End Caps
  • Extensions
  • Flanges (Vanstone, one-piece, blind)
  • Plugs Reducing fittings
  • Saddles
  • Spigots
  • Tees
  • Unions

 

INSERT FITTINGS

·         Nipples of all sizes and lengths also available.

VALVES

TRUE UNION BALL VALVES

  • 1/4 - 6" PVC / CPVC
  • Full port design
  • Reversible TFE seats
  • Viton or EPDM seals
  • Easily Automated
  • Double O-ring Stem Seals
  • Adjustable Seat Retainer
  • 1/4-2" comes with both thread & socket

ONE-PIECE BALL VALVES

  • 1/2 - 2"
  • Rated @ 150psi
  • Teflon Seats
  • EPDM Seals
  • No internal parts to replace
  • 1/4 turn operation
  • Available in socket or threaded                 

 SINGLE ENTRY BALL VALVES

  • 1/4 to 3" PVC
  • Rated to 225 psi
  • TFE Seats
  • Viton Seals
  • Full Port Design
  • Adjustable Seats

 CHECK VALVES

  • 1/4 to 6" PVC, CPVC
  • Full Port Design to 4"
  • True Union Design
  • Viton or EPDM Seals
  • Unique Square Cut Seat
  • Works in any position
  • Option: Foot valve screens

 BUTTERFLY VALVES

  • 1-1/2 to 12" PVC
  • Rated at 150psi
  • Stainless Steel Shaft
  • Fully Supported Flange Bolt Holes
  • V-Notch Liner
  • Blowout-Proof Shaft
  • Viton, EPDM or Nitrile Liners
  • Also available in 14, 16, 18, 20 & 24" sizes

 Y- CHECK VALVE

1/2 to 4" PVC

3- WAY VALVES

1/2 to 6" PVC

 PRESSURE RELIEF VALVES

  • 1/2 to 2" PVC
  • No Metal Parts to Stick or Jam
  • Hand Adjustable
  • Molded Gauge Port
  • Relieves Pressure from 5 to 75 ps
  • All plastic, No Rust or Corrosion

 NEEDLE VALVE

1/4, 3/8 & 1/2" PVC

ANGLE VALVE

1/4 to 1/2" PVC

STOPCOCK VALVES

1/4" PVC

 ECONOMY VALVES

TRUE UNION UTILITY BALL VALVE

  • 1/2 to 6" PVC
  • Heavy Bodied PVC/CPVC Contruction
  • Buttress Threaded Double Union Nuts
  • Safe-T-Block Seal Carrier
  • PTFE Ball Seats
  • EPDM or Viton O-rings
  • High Impact Polypropylene Handle
  • Safe-T-Shear Stem

 

ONE-PIECE UTILITY BALL VALVE

  • 1/2 to 2" PVC
  • PVC / CPVC Construction
  • One-piece sealed unit
  • Teflon Ball Seats
  • EPDM O-ring Seals
  • Full Sched80 Bore

 

SINGLE BALL ENTRY VALVES

  • 1/2 to 4" PVC
  • Heavy Bodied PVC White or Gray Contruction
  • Buttress Threaded External Adj Nut
  • Teflon Ball Seats
  • Buna, EPDM or Viton O-rings
  • High Impact Polypropylene Handle
  • Full Sched80 Bore